The Schneider EVlink Pro AC 22kW Tethered EV Charger is a commercial-grade three-phase EV charging station designed for selected workplace, fleet, strata, commercial and managed charging environments.
This model includes a 5m attached Type 2 charging cable and an in-built MID meter, making it suitable for sites where energy monitoring, managed access and future charging infrastructure planning are important.
This charger may suit commercial properties, fleet sites, workshops, dealerships, strata buildings and managed parking environments where faster AC charging and access control are required.
Key features include:
• 22kW three-phase AC charging capability
• 5m tethered Type 2 charging cable
• In-built MID meter
• RFID / NFC user authentication
• OCPP 1.6 communication support
• Ethernet connectivity
• IP55 weather protection
• IK10 impact protection
• Built-in 6mA DC residual current detection
• Load management capability when configured correctly
• Suitable for selected commercial, workplace, strata and fleet applications
Important:22kW charging requires suitable three-phase electrical supply and a vehicle that can accept higher AC charging speeds. Many EVs will not charge at the full 22kW rate even when connected to a 22kW-capable charger.
Final suitability depends on your EV model, property type, switchboard capacity, phase supply, cable route, user access requirements, installation environment and load management requirements.
Supply-only charger purchases do not include installation. EV chargers must be installed by a licensed electrician in accordance with applicable electrical standards, manufacturer requirements and site conditions.
For apartments, strata buildings, commercial sites, fleet locations or shared parking areas, Aether Installations recommends an assessment before purchasing or installing EV charging equipment.
Recommended next step:
Request a commercial, strata or supply + install quote before purchasing if this charger is intended for a shared, managed or multi-user environment.
The Schneider EVlink Pro AC 22kW Tethered EV Charger is a commercial-grade three-phase EV charging station designed for selected workplace, fleet, strata, commercial and managed charging environments.
This model includes a 5m attached Type 2 charging cable and an in-built MID meter, making it suitable for sites where energy monitoring, managed access and future charging infrastructure planning are important.
This charger may suit commercial properties, fleet sites, workshops, dealerships, strata buildings and managed parking environments where faster AC charging and access control are required.
Key features include:
• 22kW three-phase AC charging capability
• 5m tethered Type 2 charging cable
• In-built MID meter
• RFID / NFC user authentication
• OCPP 1.6 communication support
• Ethernet connectivity
• IP55 weather protection
• IK10 impact protection
• Built-in 6mA DC residual current detection
• Load management capability when configured correctly
• Suitable for selected commercial, workplace, strata and fleet applications
Important:22kW charging requires suitable three-phase electrical supply and a vehicle that can accept higher AC charging speeds. Many EVs will not charge at the full 22kW rate even when connected to a 22kW-capable charger.
Final suitability depends on your EV model, property type, switchboard capacity, phase supply, cable route, user access requirements, installation environment and load management requirements.
Supply-only charger purchases do not include installation. EV chargers must be installed by a licensed electrician in accordance with applicable electrical standards, manufacturer requirements and site conditions.
For apartments, strata buildings, commercial sites, fleet locations or shared parking areas, Aether Installations recommends an assessment before purchasing or installing EV charging equipment.
Recommended next step:
Request a commercial, strata or supply + install quote before purchasing if this charger is intended for a shared, managed or multi-user environment.
